|
| 7 Pittsburgh Ave Nashua, New Hampshire 03062, USA |
| Phone (603) 889-7233 Fax (603) 889-7300 Call Ed Makepeace |
Ref # | Manufacturer | Size | Year | Tonnage | Shot (oz) | Comments |
|---|---|---|---|---|---|---|
10105 | Arburg | 20-1 | 1985 | 20 | 0.75 | Model 170/90/200 - 2 machines available, IMMACULATE! |
Just Purchased! Two machines!
Model 170/90/200 Arburg injection molders
One 1985 and one 1981
Standard & parting line molding capability!
- from ISO 9002 facility, one owner machines, IMMACULATE!
- 20 ton Hydronica (hydraulic clamp)
- vertical adaptors for parting line injection capability
Clamp tonnage 20 ton (17 ton metric)
Platen size 280 x 280 mm (11 x 11 inches)
Distance between tie bars 170 x 170 mm (6.7 x 6.7 inches)
Maximum open daylight 400 mm (15.8 inches)
Mold opening stroke 225 mm (8.9 inches)
Minimum mold height 175 mm (6.9 inches)
Hydraulic ejector force 20 kN (2 tons)
Hydraulic ejector stroke 80 mm (3.2 inches)
Screw diameter 18 mm (0.7 inches)
Shot size 20 gram (0.75 ounce)
Optional screw-shot sizes up to 30 mm (2.1 ounce)
Screw stroke 95 mm (3.8 inches)
Screw volume 19 cm3 (0.65 cubic inches)
Maximum injection pressure 60 kN (14,000 psi)
Screw speed range 10-450 rpm (infinitely variable)
Hydraulic oil required 145 liters (36 gallons)
Dry cycles 1800 per hour (30 per minute)
Pump motor 7.5 kW (10 HP)
Overall length x width 3.1 x 1.2m (9.3 feet x 3.6 feet)
Height w/inj unit vertical 2.8 m (8.4 feet)
Weight without oil 1700 kgs (2868 pounds)
-----------------------------------
NOTE: Although machinery descriptions are believed to be accurate and
are from sources deemed reliable, they are not guaranteed and we
invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding machinery in the United States, and have been selling plastics machinery worldwide for over 35 years. Our inventory is constantly changing, and we are often liquidating complete plants. Please keep in contact with us so that we can keep you informed of our latest purchases.