Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


HIGH SPEED PACKAGING MACHINE!

Ref #

Manufacturer

Size

Year

Tonnage

Shot (oz)

Comments

10053 

Husky 

440-51 

1984 

440 

51 

Model X620P high speed packaging machine 


                 JUST PURCHASED!!!
22 MACHINE ^PET INJECTION AND BLOW MOLDING MOLDING PLANT!!!

Due to a corporate plant consolidation, we have just purchased 
a complete plastics molding facility that has 19 injection molders,
3 ^PET blow molders, and related accessories. All the machinery and
equipment has been relocated to our 25,000 square foot facility in
Hemmingway, South Carolina.

Most of the machinery is in very good condition, has been maintained
very well, and many of the machines have been rebuilt, remanufactured,
and-or have upgraded controls. Unfortunately, due to the time constraints
and the size of this purchase, we do not have much detailed information
to provide on the individual machines. However, inspection of the machinery
can be arranged at any time. All the machinery and accessories have been
significantly discounted to move them quickly, and are being offered
subject to prior sale.

A summary of all 22 injection and blow molders purchased at this plant
can be seen on this site at: 
http://www.timberlinemachinery.com/22newmachines.html

---------------

Included in this 22 machine purchase is a 440 ton Husky hi performance 
injection molder:

* Model X620P
* 440 Ton, 51 ounce high performance injection molding machine
* excellent condition
* Texas Instruments solid state controls
* 24.5 x 24.5 inches between tie bars
* 38.5 x 38.5 inch platens

SPECIFICATIONS AND FEATURES:
* 440 ton toggle clamp
* 51 ounce screw/pot high performance injection unit
* Hydraulic Accumulators (special)
* Bimetallic-lined barrel
* Colmonoy tapped screw flights
* Self-adjusting dropbars, electric and hydraulic interlocks on both 
  safety gates
* Induction hardened tiebars
* Oil level and temperature safety switches
* Mold cooling water manifold
* SPI mold mounting and knock-out pattern
* 24" high discharge chute opening
* Automatic injection carriage sequence controls for sprue break and 
  tack molds
* Screw speed tachometer
* 22 item problem analyser.  Identifies cause of machine cycle 
  interruption.
* 110 volt convenience outlet
* Automatic central lubrication (Lincoln System) including pump, 
  solenoids, timer, and air regulators
* Additional percentage-time temperature control station.  Required for 
  nozzle tip (mold).
* Combined cycle counter and elapsed time indicator.
* Low pressure injection hold.
* 6 HP hydraulic pump drive.
* Basic air package.  Consists of (4) 4-way single solenoid valves and 
  filter-regulator.
* Wired for:
           - parts blown-down #1
           - parts blown-down #2
           - cavity air #1
           - cavity air #2

CLAMP:

* Clamp force:                          440 U.S. tons
* Distance between Tiebars (HxV)        24.4" x 24.4"
* Clamp Stroke - Maximum                15.7"
* Mold Shutheight                       13.8" to 27.5"
* Daylight                              57.1"
* Hydraulic Ejector Stroke - Maximumn   9.8"
* Clamp Speed                           2400"/Minute

EXTRUDER:

* Screw Diameter                        3.35"
* Screw L/D Ratio                       20:1
* Screw Speed range                     90-180 RPM
* Screw Compression Ratio               3:1

TWO-STAGE INJECTION:

* Shooting Pot Diameter                 2.36"
* Injection Capacity-Stroke             15.7"
     (ploystyrene)  -Weight             51 oz.
* Injection Pressure-Maximum            28,2000 psi
* Nozzle Hole Diameter                  630" Rotary Valve Spherical
* Nozzle Tip                            1/2" Radius

ELECTRICAL:

* Primary Voltage Phase/Cycle           460/3/60
* Hydraulic Pump Motor                  60 HP
* Extruder Motor                        50 HP DC
* Heaters                               44 KW
* Heater Voltage                        230 Volts
* Control Circuit                       110/1/60 (provided by integral transformer)

GENERAL

Floor space required                    181 square feet
Height                                  10 feet
Weight                                  46,000 pounds

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window