Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


(6) 150 ton Nissei vertical insert molders, YEAR - 2000, low hours, like new !!!

Ref #

Manufacturer

Size

Year

Tonnage

Shot (oz)

Comments

10132 

Nissei 

150-12 

2000 

150 

12 

Nissei vertical insert molders, 6 available, low hours, like new !!! 


Nissei 150 ton vertical insert injection molding machines
6 identical machines available !!!
Very late model - installed in 2000 !
Low hours, like new !!! 
Replacement value is $200,000 EACH !!!

Model TD150-36ASE
Perfect for reel-to-reel and other fully automated applications !
  (automation equipment shown in photos is not included)

Special options to allow for running a much wider range of mold thicknesses
  - Extended open daylight - 31% more than standard! increased by 200mm (7.87 inches)
  - Extended clamp  stroke - 29% more than standard! increased by 100mm (3.94 inches)

NC9300TII microprocessor controls
Core pull sequences
Robot interface built into control package
Safety door for robot

INJECTION UNIT
Screw diameter         50 mm                 (1.97 inches)
Injection capacity     353 cubic centimeters (21.53 cubic inches)
Plasticizing capacity  77 kg per hour        (170 pounds per hour)
Shot capacity          314 grams PS          (12.0 ounces)
Injection pressure     1715 kg/ sq.cm        (24,392 psi)
Injection force        34 tons (330 kN)
Injection rate         163 cu.cm/sec
Nozzle touch force     3.5 tons (34 kN)
Parting line height    200-300 mm            (7.87-11.81 inches)
Screw speed
  High torque          0-120 RPM, infinitely adjustable
  Low  torque          0-170 RPM, infinitely adjustable

CLAMP UNIT
Clamp force                150 metric tons   (165 US tons) (1470 kN)
Clamp stroke               450 mm            (17.72 inches)
Mold thickness, minimum    400 mm            (15.75 inches)
Open daylight,  maximum    850 mm            (33.46 inches)
Distance between tie bars  460 x 460 mm      (18.11 inches)
Overall platen size        690 x 690 mm      (27.17 inches)
Maximum mold size          460 x 690 mm      (18.11 x 27.17 inches)
Ejector stroke             60 mm             (2.36 inches)
Ejector force              3.45 tons         (33.8 kN)
Mold open force            12.2 tons         (118  kN)

GENERAL
Electric motor                          18.5 kW  (40 HP)
Heaters                                 12.26 kW
Hydraulic oil required                  570 liters
Overall machine dimensions (L x W x H)  4.00 x 1.91 x 2.93 meters (13.12 x 6.27 x 9.61 feet)
Floor space required  (L x W)           3.6 x 1.61 meters (11.81 x 5.3 feet)
Machine weight (approximate)            9.4 tons

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window