Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


Just purchased ! 1997 Nissei vertical insert injection molder, lab use only, LIKE NEW !!!

Ref #

Manufacturer

Size

Year

Tonnage

Shot (oz)

Comments

10126 

Nissei 

100-7 

1997 

100 

just purchased ! low hours, like new, lab use only!  


1997 Nissei 100 ton vertical insert injection molding machine
Model TD100-25ASE
VERY low hours - lab use only - like new !!!
Perfect for reel-to-reel automation applications !

NC9000GII microprocessor controls
extra I/O (input/output) for robot interface
Top and bottom ejectors
Special core sequence for hold pins
Special P-Rom for core sequence
RS232 printer port
extended open daylight - 25.6 inches (650 mm)
adjustable nozzle height (170 mm + 100 mm - 0 mm)

INJECTION UNIT
Screw diameter         40 mm                 (1.58 inches)
Injection capacity     201 cubic centimeters (12.26 cubic inches)
Plasticizing capacity  44 kg per hour        (97 pounds per hour)
Shot capacity          179 grams PS          (6.31 ounces)
Injection pressure     2300 kg/ sq.cm        (32,645 psi)
Injection force        28.2 tons (273.4 kN)
Injection rate         108 cu.cm/sec
Nozzle touch force     2.75 tons (27.0 kN)
Parting line height    170-270 mm            (6.69-10.63 inches)
Screw speed
  High torque   0-170 RPM, infinitely adjustable
  Low  torque 170-240 RPM, infinitely adjustable

CLAMP UNIT
Clamp force                100 tons (980 kN)
Clamp stroke               300 mm            (11.81 inches)
Mold thickness, minimum    350 mm            (13.78 inches)
Open daylight,  maximum    650 mm            (25.59 inches)
Distance between tie bars  375 x 375 mm      (14.75 inches)
Overall platen size        575 x 575 mm      (22.64 inches)
Maximum mold size          375 x 575 mm      (14.75 x 22.64 inches)
Ejector stroke             50 mm top, 50 mm bottom (1.97 inches)
Ejector force, top         1.76 tons (17.2 kN)
Ejector force, bottom      3.45 tons (33.8 kN)
Mold open force            6.49 tons (63.6 kN)

GENERAL
Maximum hydraulic pressure              140 kg/ sq.cm
Electric motor                          25 HP
Heaters                                 10.55 kW
Hydraulic oil required                  440 liters
Overall machine dimensions (L x W x H)  3.88 x 1.71 x 2.97 meters (12.73 x 5.61 x 9.74 feet)
Floor space required  (L x W)           3.08 x 1.52 meters (10.10 x 5.0 feet)
Machine weight (approximate)            7 tons 

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window