Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


Just purchased! 1997 Engel vertical insert injection molder, lab use only, LIKE NEW !!!

Ref #

Manufacturer

Size

Year

Tonnage

Shot (oz)

Comments

10125 

Engel 

85-5 

1997 

85 

just purchased ! low hours, like new, lab use only! 


1997 Engel 85 ton vertical insert injection molding machine
Model ES330/85
CC100 microprocessor controls
Rugged C-frame clamp design (no tie bars)
VERY low hours - lab use only - like new !!!
Perfect for reel-to-reel automation applications !

INJECTION UNIT
Screw diameter         1.378 inches          (35 mm)
Injection capacity     9.4 cubic inches
Recovery rate          1.2 ounces per second 
Plasticizing capacity  270 pounds per hour
Shot capacity          5.0 ounces polystyrene
Injection pressure     30,000 psi maximum    (23,200 psi regenerative) 
Injection rate         6.8 cu.in/sec         (9.3 cu.in/sec regenerative)
Injection speed        4.6 inches/sec        (6.2 inches/sec regenerative)
Nozzle touch pressure  2.4 tons
Screw speed            25-420 RPM, infinitely adjustable
Screw stroke           6.3 inches
Screw torque           260 foot-pounds
Screw L/D ratio        20:1
Nozzle stroke          9.84 inches

CLAMP UNIT
Clamp force                85 tons
Clamp stroke               11.81 inches
Mold thickness, minimum    11.02 inches
Open daylight,  maximum    22.83 inches
Overall platen size        21.65 x 13.23 inches
Maximum mold size          21.65 x 13.23 inches
Ejector stroke             5.0 inches
Ejector force              2 tons

GENERAL
Maximum hydraulic pressure              2320 psi
Pump capacity                           24 GPM
Electric motor                          20 HP
Heaters                                 6.6 kW
Number of heat control zones            3 + nozzle
Hydraulic oil required                  106 gallons
Overall machine dimensions (L x W x H)  124 x 87.7 x 106.5 inches (10.33 x 7.31 x 8.88 feet)
Machine weight (total)                  26,432 pounds
Hopper capacity                         44 pounds
Water required                          6 GPM

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window