|7 Pittsburgh Ave Nashua, New Hampshire 03062, USA|
|Phone (603) 889-7233 Fax (603) 889-7300 Call Ed Makepeace|
Close This Window
Shot Capacity (pounds)
complete 55 gallon (225 litre) L-ring drum package available
1994 Cincinnati accumulator head blow molding machine Model T1100 single 35 pound accumulator head Automatic part take-out Excellent condition OFFERED AS COMPLETE 55 GALLON (225 LITRE) DRUM BLOW MOLDING SYSTEM - OR - STAND-ALONE 35 POUND (15.3 KG) ACCUMULATOR HEAD BLOW MOLDING MACHINE PERFECT FOR 55 GALLON (220 LITRE) DRUMS! Optionally available as a complete package drum molding system including: - like-new modern 55 gallon L-ring drum mold - heavy duty bottom blow stand with spreader and double unscrewing threaded-cap capability * THE BOTTOM BLOW STAND ASSEMBLY WITH SPREADER AND DOUBLE UNSCREWING CAPABILITY IS NOT INCLUDED WITH THIS MACHINE - IT IS OFFERED WITH THE 55 GALLON DRUM MOLDS DETAILED IN OUR REFERENCE NUMBER 90041 Camac BEL microprocessor controls 50 point parison programming 120mm (4.5 inch) 28:1 air-cooled extruder with 5 heat zones 200HP brushless DC extruder drive motor Barrier screw design and grooved feed throat for high out plasticizing 1350 pounds per hour plasticizing capability (rated with .96 density, .3MI HDPE) 5.0 to 17.7 inch head tooling range 125 ton clamp (110 metric tons) 1275mm wide x 1575 mm high (50.2 x 62.0 inches) clear platen 140 mm (5.5 inches) tie bar diameter 1000 mm (39.4 inches) maximum clamp stroke 1800 mm (70.9 inches) maximum mold open daylight 340 mm (13.4 inches) minimum mold open daylight 2 tie bar clamp design for easy mold change accessability Low deflection, fully supported, cast platen High performance pre-fill hydraulically driven clamp system Overall machine dimensions w/o part take-out (LxWxH) 34’4” x 12’9” x 14’ (10.47 x 3.88 x 4.27 m) This machine will not last long!
----------------------------------- NOTE: Although machinery descriptions are believed to be accurate and are from sources deemed reliable, they are not guaranteed and we invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding machinery in the United States, and have been selling plastics machinery worldwide for over 35 years. Our inventory is constantly changing, and we are often liquidating complete plants. Please keep in contact with us so that we can keep you informed of our latest purchases.
Close This Window