Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!

1990 Sterling Davis-Standard 55 gallon (220 liter) drum blow molder !

Ref #




Shot Capacity (pounds)

Head Configuration



Sterling Davis-Standard 





55 gallon (220 liter) drum blow molder 

1990 Sterling APV (Davis Standard) Model SE-50
35 Pound Accumulator Head Blow Molding Machine
Perfect for 55 gallon (220 liter) drum production

Automatic part take out
Barber Coleman Maco 8000 microprocessor machine controls
Dual station 100 point parison programming
Very good condition

Head configuration .......... single 35 pound accumulator head
Shot size ................... 35 pounds
Extruder diameter ........... 6 inch
Extruder drive .............. 300 HP D.C.
Extruder L/D ratio .......... 24:1
Plasticizing rate ........... 1500 pounds per hour
Clamp force ................. 188 tons
Clear platen dimensions ..... 60 x 60 inches
Maximum clamp open daylight . 72 inches
Minimum clamp closed daylight 26 inches
Size range of head tooling .. 3 to 16 inches

Barber Coleman Maco 8000 controls
The control panel is a three-door NEMA enclosure with main power disconnect shock mounted on 
the unitized base wired 460 volts/ 3 phase/ 60 hertz.  Barber-Coleman MACO 8000 Microprocessor 
control system with touch screen operator's station for control of the following functions:  Control 
temperature on all zones displayed via operator's station. (up to 96 zones available)  The system 
provides independent zone temperature control and can be independently tuned .  Total machine 
sequential control up to 100 independent timer functions available depending on number of 
sequence modules in system. Solid state cartridges for program and control parameter storage.  
Parison process control with individual weight and die gap settings and graphic display of profile 
setpoints. 12" programmable touch sensitive CRT display. Parison programming controls of up to 
100 points per head.   The exclusive use of individual control modules allows initial system to be 
easily expanded to meet future requirements. Sequence control is accomplished by the use of  an 
IBM or IBM compatible personal computer using industry standard JIC  graphic symbols.


NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest

Close This Window