Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!

Exceptionally well maintained machine!

Ref #




Shot Capacity (pounds)

Head Configuration



Sterling Davis-Standard 




16 inch head centers, 2.5 inch 75HP extruder, great condition 

1988 Sterling Davis-Standard
Dual 2 pound accumulator head blow molder
Barber Coleman Maco 8000 machine controls and parison programming

* 16 inch head centers
* 2.5 inch diameter, 24:1 L/D, 75HP extruder
* 350 pounds/hour plasticizing capacity
* 30 inch wide x 18 inch long clear platen
* 20 ton clamp
* Maximum open clamp daylight  39 inches
* Minimum clamp closed daylight  9 inches
* 2.5 inch thick platens
* 2.5 inch diameter tie bars
* Base dimensions are 6 feet wide x 12 feet long x 7 feet 3 inches high
* Installed machine height to top of head is 13 feet 6 inches
* 25HP main pump motor

The control panel is a three-door NEMA enclosure with main power disconnect shock mounted on 
the unitized base wired 460 volts/ 3 phase/ 60 hertz.  Barber-Coleman MACO 8000 Microprocessor 
control system with touch screen operator's station for control of the following functions:  Control 
temperature on all zones displayed via operator's station. (up to 96 zones available)  The system 
provides independent zone temperature control and can be independently tuned .  Total machine 
sequential control up to 100 independent timer functions available depending on number of 
sequence modules in system. Solid state cartridges for program and control parameter storage.  
Parison process control with individual weight and die gap settings and graphic display of profile 
setpoints. 12" programmable touch sensitive CRT display. Parison programming controls of up to 
100 points per head.   The exclusive use of individual control modules allows initial system to be 
easily expanded to meet future requirements. Sequence control is accomplished by the use of  an 
IBM or IBM compatible personal computer using industry standard JIC  graphic symbols.

This machine has just become available and we are currently compiling
detailed specifications on it. It is available now and may be 
inspected at your convenience.

Let us know ASAP if you have sincere interest so we can give you priority 
notification on the specifications as soon as we've put them together! 

If you don't want to take a chance on this machine being sold while you 
wait for the specifications, we can arrange an immediate inspection for 


NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest

Close This Window