Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


Ref #

Manufacturer

Model

Year

Shot Capacity (pounds)

Head Configuration

Comments

30078 

Improved 

B50 

1979 

16 

single 

FULLY REBUILT! excellent condition! 


JUST PURCHASED!
IMPROVED B50 BLOW MOLDING MACHINE
16 POUND ACCUMULATOR HEAD
FULLY REBUILT!

- single 16 pound accumulator head
- perfect for trash cans or similar products!
- 55 inch (horizontal) x 40 inch (vertical) clear platen
- Moog parison programming
- Power operated vertical clamp adjustment
- Unobstructed part drop out area
- Horizontal clamp adjustment to accommodate molds with off center parting lines

Improved's B50 incorporates many of the same reliability and design features 
of their popular B30 and B24 models. Produce large parts such as automotive 
gas tanks, 30 gallon and larger industrial drums, large toys, recreational products, 
piping, etc - virtually any part requiring a mold up to 72 inches in length. The B50
also incorporates such innovations as a cantilevered clamp design to permit easy 
access for part removal and quick mold change over, 

ADDITIONAL SPECIFICATIONS:

Plasticizing capacity     860 pounds/hour   (390 kg/hour)
Maximum melt pressure    8395 pounds/sq inch   (590 kg/sq cm)
Parison drop rate     3.4 pounds/sec  (1.5 kg/sec)
Extruder diameter   4 inches  (102 mm)
Extruder L/D ratio   24/1
Maximum screw speed   117 RPM
Maximum parison tooling diameter  12 inches  (305 mm)
Hydraulic clamp, force   46.7 tons
Clamp speed, dry cycles per minute  7
Maximum clamp stroke   39.5 inches  (1003 mm)
Maximum clamp open daylight   60 inches  (1524 mm)
Minimum clamp closed daylight  20.5 inches  (521 mm)
Clear platen dimensions  50.5 inches horizontal x 40 inches vertical
Clear platen dimensions  1283 mm horizontal x 1016 mm vertical
Clamp height adjustment, vertical  24 inches  (610 mm)
Pump capacity  145 gallons/ minute  (549 liters/ minute)
Oil reservoir capacity   300 gallons  (1136 liters)
Number of electric motors  2 
Total rated horsepower    160HP
Maximum amperage at 230/3/60 volts   400
Overall dimensions  19 ft 2 in Long x 13 ft 2 in Wide x 13 ft 1 in High
Overall dimensions  5842 mm Long x 4013 mm Wide x 3988 mm High

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window