Timberline Machinery Inc.
7 Pittsburgh Ave                           Nashua, New Hampshire 03062, USA
Phone (603) 889-7233         Fax (603) 889-7300        Call Ed Makepeace

Close This Window

   Request Quotation or Additional Information

   Make an offer on this machine!


8-STATION NISSEI ONE-STEP ^PET BLOW MOLDER!

Ref #

Manufacturer

Model

Year

Production Capacity (bottles/hr)

Comments

30071 

Nissei 

ASB650H 

1988 

1500 

nice machine, good operating condition 


1988 Nissei ASB 650H
One-step ^PET stretch-blow molder

* Injection Unit:
* Injection Unit                     FS-250   18 ounce
* Screw Diameter (mm)                72
* Injection Capacity (cm3/shot)      651
* Injection Rate (cm3/sec.)          345
* Injection Pressure (kg/cm2)        1135
* Plasticizing Capacity (PET)(kg/H)  352.0
* Screw stroke (mm)                  160
* Screw speed (mm)                   H.T O-155       L.T O-227

* Injection Station:
* Clamping Force (kg) Upper/Lower    25070/28150
* Clamping Stroke (mm) Upper/Lower   340/275

* Heating Station:
* Heating Core Stroke (mm)           300
* Heating Core Cylinder Dia. (mm)    63
* Heating Pot Stroke (mm)            185
* Heating Pot Cylinder Dia. (mm)     63
* Number of Heating Zone/Parison     3

* Stretch and Blow Molding Station:
* Stretch Stroke (mm)                200
* Stretch Cylinder Dia. (mm)         100
* Stretch Force (kg)                 775
* Blow Core Stroke (mm)              300
* Blow Core Cylinder Dia. (mm)       125
* Blow Core Clamping Force (kg)      1215
* Blow Mold Clamping Force (kg)      34360
* Blow Mold Clamping Stroke (mm)     490
* Bottom Mold Clamping Force (kg)    6600
* Bottom Mold Clamping Stroke (mm)   60
* Blow Mold Platen Size (WxH)(mm)    970x370

* Bottle Eject Station:
* Ejector Stroke (mm)                185
* Ejector Cylinder Dia. (mm)         80

* Electrical System:
* Electric Motor Unit                1
* Motor Size (kw/p)                  55kw/6p
* Total Heating Capacity (kw)        32.18
* Control Circuit Voltage (V)        100/110
* Power Consumption, Rating (kw), Working (kw)

* Hydraulic System:
* Amount of Hyd. Oil Required (L)    1300
* Pump Delivery (at 7kgcm2) (L/min)  497
* System Pressure, Max. (kg/cm2)     140
* Heat Ex. Water Required (25ftC) (L/min)  120+20

* Pneumatic System Requirements:
* Machine Operating Air,
*    Pressure (kg/cm2)                9.9
*    Volume (at atmosphere) (L/min)   777
* Processing Air,
*    Pressure (kg/cm2)                14
*    Volume (at atmosphere) (L/min)   1020
* Total Volume Required (FAD)(L/min)  1797

* Mold Chilling Requirement (Min. Reqt):
* Cooling Capacity (kcal/H)           22000
* Operating Pressure, Min. (kg/cm2)   3
* Chilling Water Delivery (at 10-15 ft/C) (L.min)  160

-----------------------------------

NOTE: Although machinery descriptions are believed to be accurate and 
      are from sources deemed reliable, they are not guaranteed and we 
      invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding
machinery in the United States, and have been selling plastics
machinery worldwide for over 35 years. Our inventory is constantly
changing, and we are often liquidating complete plants. Please keep
in contact with us so that we can keep you informed of our latest
purchases.

Close This Window