|7 Pittsburgh Ave Nashua, New Hampshire 03062, USA|
|Phone (603) 889-7233 Fax (603) 889-7300 Call Ed Makepeace|
Close This Window
Shot Capacity (ounces)
Impco (Graham Engineering)
single or dual
perfect for 5 gallon bottles, polycarbonate capability, available with single 4.75 pound or dual 3.37 pound heads
Impco Model B30 reciprocating screw blow molding machine available with your choice of heads: single 4.75 pound head or dual 2.37 pound heads on 15 inch centers dual channel Moog 25 point parison programming 30 inch wide x 24 inch long clear platen includes set of tooling can be shown in operation 1975 original year of manufacture Very popular and versatile machine! It won’t last long! SPECIFICATIONS: CLAMPING MECHANISM Hydraulic Clamp, Force (tons) 20 Clamp Speed, Dry Operation (cycles/min) 15 Clamp Stroke, Max (inches) 23 Clamp Open Daylight Max (inches) 35 Clamp Closed Daylight min (inches) 12 Clear Platen Dimensions (inches) 30 wide x 24 high Clamp Height Adjustment Vertical (in) 7 Air Operated stripper Stroke (inches) 8 3/4 WATER REQUIREMENTS Machine Water Consumption @ 60f (gpm) approx.13 Refrigeration for Mold (ton) approx.13 AIR REQUIREMENTS Compressor (hp) approx.10-12 Air Presure (psi) approx.60-150 Air Flow (cfm free air) approx.27 DIMENSIONS Length (ft & in) 19'- 10" Width (ft & in) 7'- 6" Height (ft & in) 9'- 4" Approximate Machine weight (lbs) 12,500 RECIPROCATING SCREW UNIT Melt Capacity (grams) 2,100 Plasticizing Capacity (lbs/hr) 400 Screw Diameter (in) 3.75 Screw L/D Ratio 20/1 Parison Drop Rate (gr/sec)Max. 740 Maximum Parison Tooling Diameter (in) 8 Feed Hopper Capacity (lbs) 110 ELECTRICAL SYSTEM PUMP Motor 75hp Controls 110v 60Hz 3 phase Heater Zones 230V/460V/3 phase/60Hz Screw Barrel 3 Each Die Head 1 Maximum Heat Load(KVA) 66 Total Machine Running (KVA) 123 Total Machine Surge (KVA) 235
----------------------------------- NOTE: Although machinery descriptions are believed to be accurate and are from sources deemed reliable, they are not guaranteed and we invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding machinery in the United States, and have been selling plastics machinery worldwide for over 35 years. Our inventory is constantly changing, and we are often liquidating complete plants. Please keep in contact with us so that we can keep you informed of our latest purchases.
Close This Window