|7 Pittsburgh Ave Nashua, New Hampshire 03062, USA|
|Phone (603) 889-7233 Fax (603) 889-7300 Call Ed Makepeace|
Close This Window
Extrusion Screw Diameter
HDPE-PP-PC-PVC capability - 9 machines available, up to 3 liter finished bottles!
** BATTENFELD FISHER CONTINUOUS EXTRUSION VK1-2 BLOW MOLDING MACHINES ** HDPE, PP, PC, and PVC CAPABILITY! ** In machine trimming, orientation, and removal for fully finished bottles! ** Produce center or F-style offset necks, with or without handles! * Model VK1-2 * 9 machines available! * Easy machines to operate and maintain! * One owner machines, extremely well maintained * Versatile range of processing capabilities, including HDPE-PP-PC-PVC * Versatile range of product capabilities, including wide mouth * For up to 3 liter fully finished bottles * Shuttle clamp * Single head * Hydraulic blowpin calibration * Mechanical transport and mold closing GENERAL INFORMATION: * Standard and handleware production capability * Extruder with axial screw movement, (screw ejecting device) and central screw cooling for PVC. * Rapid screw changing, by screw pressure ejection unit and swing away calibration unit. * Outstanding access to parison head, mold and calibration unit. * Calibration unit with central platen for single and double calibration. * Block pneumatic close to the userís position, with pilot light indication. * Continuous independent cooling of the extruder belt drive, and the feed brake motor. * Feed brake motor with automatic self adjusting brake. * Tiebarless locking unit. * Parallel mold closure. * Precise interlocking of locking and calibration units. * Reliable technology resulting from a decade of FHB experience: Harmonious movement of the locking unit by motorised crank drive, with precise end positioning, mounted on a maintenance and tolerance free rocker arm. * Automation by transfer of the blown article to the integrated core separator. * Arranged transfer of the article standing upright straight ahead, or through a discharge tube. * Separate switch cabinet for electric units, which are mounted with snap fasteners on rerails for quick service. * Sideway sliding guards. VK1-2 SPECIFICATIONS: BLOWING UNIT Operation electro mechanical/hydraulic Mold locking force 40 kN (5 tons) Dry cycling time 1.9 sec. Mold opening stroke D 160mm (6.3 inches) Mold dimensions (mm-in) max: Width A/Depth B/ Height C 200/ 2x90 /400 (mm) Width A/Depth B/ Height C 8/ 2x3.5 / 16 (inches) EXTRUDER Screw diameter/ length 50mm (2 inch) diameter/ 20-1 LD Extruder infinitely variable DC drive Plasticizing capacity 40 kg/hr (100 lb/hr) Heating capacity PE/PVC, 10kW Heating Zones 3 AIR WATER AND ELECTRICITY CONSUMPTION Air requirements (intake capacity) approx. 1000/1500min. Effective air consumption at a max. size of article in PVC, 40/50m3/h Working pressure, bar 8 Average power consumption aprox. Min./max. kW/h 14/16 Connected load min./max. kW 24/26
----------------------------------- NOTE: Although machinery descriptions are believed to be accurate and are from sources deemed reliable, they are not guaranteed and we invite your inspection prior to purchase.
We are one of the largest stocking dealers of plastics molding machinery in the United States, and have been selling plastics machinery worldwide for over 35 years. Our inventory is constantly changing, and we are often liquidating complete plants. Please keep in contact with us so that we can keep you informed of our latest purchases.
Close This Window