Timberline Machinery Inc.

Ref #	Manufacturer	Model	Year	Shot Capacity (pounds)	Head Configuration	Comments
30027	Hartig Davis-Standard	MCP100	1994	100	single	60 x 120 inch clear platen, dual 6 inch extruders with dual 300HP DC drives
30157	Sterling Davis-Standard	SE675	1999	75	single	425 HP 6 inch extruder, 60 x 84 clear platen, part take-out
30114	Hartig Davis-Standard		1990	70	single	300HP, 6 inch extruder, 48 x 56 inch clear platen
30113	Hartig Davis-Standard	MR4-6070-4872	1983	70	single	part take out, dual station clamp for twice the production
30119	Hartig Davis-Standard	MR4-6050-4872-AX140	1987	50	single	300HP 6 inch extruder, part take out, 72 inch long platen, dual station clamp for twice the production
30118	Hartig Davis-Standard	MR4-6050-4872-AX140	1989	50	single	300HP 6 inch extruder, part take out, Maco 8000, 72 inch long platen, dual station clamp for twice the production
30112	Krupp Kautex	KB 250	1988	50	single	drum blow molder
30170	Sterling Davis-Standard	SE650DD	1997	50	dual	dual 300HP 6 inch extruders, dual clamps each with 60 x 84 inch clear platens, dual part take outs
30102	Sterling Davis-Standard	SE4540S	1997	40	single	perfect for 55 gallon (225 litre) drums! 74 x 60 inch clear platen, 4.5 inch extruder
30093	Sterling Davis-Standard	SE3540S	1997	40	single	perfect for 55 gallon (225 litre) drums! 60 x 60 inch clear platen, 3.5 inch extruder
30169	Cincinnati	T-3000	1997	35	dual	2 machines available, dual 300HP extruders, 340 ton clamp, 82 x 72 inch clear platens, part take-out
30143	Cincinnati	T-1100	1994	35	single	complete 55 gallon (225 litre) L-ring drum package available
30159	Moretti	M400	1991	35	single	47 x 71 inch clear platen, part take-out, perfect for drums
30136	Sterling Davis-Standard	SE50	1990	35	single	55 gallon (220 liter) drum blow molder
30025	Uniloy Cincinnati	35S60-4466	1987	35	single	55 gallon (220 liter) drum blow molder ! upgraded head installed in 1999 !
30108	Krupp Kautex	KB 250	1974	34	single	drum machine
30149	Battenfeld	SMP4533-4856	1994	33	single	complete 55 gallon (220 liter) tight-head drum package available
30028	Hartig Davis-Standard		1984	33	single	in lab! only 1000 hours! immaculate!
30072	Hartig Davis-Standard	MCP45S33	1997	33	single	in lab - only 1700 hours - loaded with options!
30144	Sterling Davis-Standard	SE630	2000	30	single	like-new blow molder, complete 55 gallon (220 liter) L-ring drum package available
30120	Hartig Davis-Standard		1981	25	dual	alternating clamp design, run two different parts at a time
30146	Graham Engineering	22DL7484	1996	22	dual	immaculate condition, 36 inch head spacing, large 74 x 84 inch clear platen, 4.5 inch 200 HP extruder, part take-out
30154	Hartig Davis-Standard	MCP-45D20-7258-S200	1995	20	dual	36 inch head centers, 72 x 58 inch clear platen, 4.5 inch 200 HP extruder, part take-out
30029	Hartig Davis-Standard		1988	20	single	100HP�3.5
30070	Hartig Davis-Standard	3515-3840	1993	20	single	JUST AVAILABLE, IMMACULATE, IN CLEAN ROOM!
30076	Sterling APV	S34	1991	20	single	Just purchased! 20 pound head with 100HP extruder drive
30168	Sterling Davis-Standard	SE620D	1997	20	dual	42 inch head centers, 84 x 66 inch clear platen, 6 inch 300 HP extruder, roll-out press, part take-out
30115	Sterling Davis-Standard	SE3520S	1986	20	single	3.5 inch 100HP extruder, well maintained, one-owner machine
30078	Improved	B50	1979	16	single	FULLY REBUILT! excellent condition!
30167	Moretti		1994	16	dual	dual extruders, 63 x 57 inch clear platens
30030	Hartig Davis-Standard	MR4-3515-4256-120S	1987	15	single	100HP 3.5 inch extruder, 42 x 56 inch clear platen
30121	Sterling Davis-Standard	SE4515D	1994	15	dual	part take out, 36 inch head spacing
30084	Sterling Davis-Standard	SE4515D	1997	15	dual	74 x 60 clear platen, part take-out
30164	Sterling Davis-Standard	SE3515D	1994	15	dual	roll-out press, part take-out, 100HP 3.5 inch extruder, 48 x 36 inch clear platens
30161	Sterling Davis-Standard	SE4515D	1989	15	dual	36 inch head centers, extra large 74 x 60 inch clear platen, part take-out
30160	Sterling Davis-Standard	SE4515D	1992	15	dual	36 inch head centers, extra large 74 x 60 inch clear platen, part take-out
30155	Sterling Davis-Standard	SE4515D	1995	15	dual	36 inch head centers, extra large 74 x 60 inch clear platen, part take-out, roll-out press
30147	Sterling Davis-Standard	SE4515D	1996	15	dual	extra large 74 x 60 inch clear platen, part take-out, dual bottom blow stands
30162	Sterling Davis-Standard	SE40	1987	15	single	high output 200HP 4.5 inch extruder, 42 x 48 inch clear platen
30075	Sterling Davis-Standard	S20	1983	11	single	Just purchased! 2 machines available! 11 pound head with 100HP extruder drive
30031	Cincinnati	T-1100	1994	10	dual	200HP�120mm extruder�, 125 ton�clamp
30145	Graham Engineering	10DP7440	1998	10	dual	immaculate condition, 36 inch head spacing, 3.5 inch 100 HP extruder, part take-out
30156	Graham Engineering	10DP6040	1995	10	dual	30 inch head spacing, 3.5 inch 125 HP extruder, part take-out, roll-out press, Maco 6500 controls
30080	Hartig Davis-Standard	MR4D	1980	10	dual	Just purchased! Very good condition!
30032	Hartig Davis-Standard		1988	10	dual	100HP�3.5
30033	Sterling Armac	AT-10	1982	10	single	34 point Hunkar parison programmer, 28
30165	Sterling Davis-Standard	SE3510D	1994	10	dual	100HP 3.5 inch extruder, 48 x 36 inch clear platens, part take-out
30087	Sterling Davis-Standard	SE3510D	1997	10	dual	60 x 60 clear platen, roll away press, part take-out
30163	Sterling Davis-Standard	SE4510D	1995	10	dual	30 inch head centers, 60 x 60 inch clear platen, 200HP 4.5 inch extruder, part take-out, roll-out press
30034	Battenfeld	BEKB-25	1982	8	single	40HP 2.8" extruder, 33 ton clamp BEKB-25
30035	Cincinnati	E90	1994	8	dual	3.5 inch extruder�
30148	Hartig Davis-Standard	SMP35-(2)8-5030-S90	1994	8	dual	50 x 30 inch clear platen, 3.5 inch 150 HP extruder, part take-out, dual bottom blow stands
30166	Sterling Davis-Standard	SE3508D	1992	8	dual	roll-out press, part take-out, 100HP 3.5 inch extruder, 48 x 36 inch clear platens
30091	Sterling Davis-Standard	SE3508D	1986	8	dual	3.5 inch 100HP extruder, well maintained, one-owner machine
30124	Hartig Davis-Standard	SMP30-206-3624S40	1990	6	dual	18 inch head centers, 3 inch 75HP extruder
30171	Sterling Davis-Standard	SE3506D	1993	6	dual	30 inch head spacing, 60x60 inch clear platen, 100HP 3.5 inch extruder
30132	Sterling Davis-Standard	SE3506D	1989	6	dual	24 inch head centers, 3.5 inch 100HP extruder, one-owner machine
30037	Battenfeld	BEKB-25	1982	5	single	40HP 2.8 inch extruder, 33 ton clamp
30150	Cincinnati	Eclipse 90	1993	5	dual	excellent condition, perfect 5 gallon bottles 2-up !!!
30123	Cincinnati	Eclipse 75	1992	5	single	excellent condition, perfect for 5 gallon bottles, 2 machines available
30134	Sterling Davis-Standard	SE3505D	1985	5	dual	brand new Maco 6500 microprocessor controls! 3.5 inch 100 HP extruder
30175	Sterling Davis-Standard	SE305D	2000	5	dual	24 inch head spacing, 48 x 36 inch clear platen, 100HP 3.5 inch extruder, part take-out
30173	Sterling Davis-Standard	SE305D	1994	5	dual	24 inch head spacing, 48 x 36 inch clear platen, 75HP 3 inch extruder
30174	Sterling Davis-Standard	SE3505D	1994	5	dual	24 inch head spacing, 48 x 60 inch clear platen, 100HP 3.5 inch extruder. part take-out
30138	Uniloy	C350	1979	5	dual	upgraded with new heads and Maco 8000 parison programming
30139	Uniloy	C350	1975	5	dual	upgraded with Barber Coleman Maco Breeze parison programming
30038	Uniloy Cincinnati	3S35-3434	1991	5	single	125HP, 3.5 inch extruder
30088	Hartig Davis-Standard	SMP35(2)3-3624S40	1988	3	dual	exceptional condition, 18 inch head centers, 3.5 inch 100HP extruder
30092	Sterling Davis-Standard	SE3003D	1985	3	dual	3 inch 75HP extruder, well maintained, one-owner machine
30172	Sterling Davis-Standard	SE303D	1994	3	dual	24 inch head spacing, 48 x 36 inch clear platen, 75HP 3 inch extruder
30117	Cincinnati	Eclipse 75	1992	2.5	dual	2 machines available, great condition, 12 inch head spacing
30089	Sterling Davis-Standard	SE2502D	1988	2	dual	16 inch head centers, 2.5 inch 75HP extruder, great condition

Ref #	Manufacturer	Model	Year	Extrusion Screw Diameter	Head Configuration	Comments
30062	Battenfeld Fischer	054-1	1986	80	single	3 machines available, PVC capability
30048	Battenfeld Fischer	106-1	1984	80	triple 115mm	Priced Right !!! two machines available
30047	Battenfeld Fischer	VK1-2	1986	50	single	HDPE-PP-PC-PVC capability - 9 machines available, up to 3 liter finished bottles!
30042	Battenfeld Fischer	VK1-6DL	1985	120	dual	1�through�10�liter�container capability
30090	Bekum	121	1979	80	single	or optional dual 140mm head, just purchased, nice machine
30135	Bekum	121	1983	80	various	Just purchased 6 Bekum 121's - Priced Right !
30043	Bekum	121	1984	80	dual 140mm or single	PVC and HDPE capability
30060	Bekum	121	1989	60	Single - 3 layer	Co-extrusion, 3 layer, LIKE NEW - FROM LAB!
30040	Bekum	121	1990	50	single - 5 layer	Co-extrusion, 5 layer, only 700 hours!
30079	Bekum	402S	1986	70	single, triple, or quad	single sided shuttle machine, lab use only
30082	Cincinnati Hayssen	2150	1985	50	dual	Versatile! Compact design!
30130	Heins PCM	CM3000D	1994	63.5	dual	complete system for view stripe oil bottles and 1/2 gallon dairy bottles! 4-up production on dual sided shuttle
30127	Krupp Kautex	KBS Co-ex 7S	1997	120	single - 7 layer	7 layer (6 extruder) co-extrusion blow molder, like new, used only in lab
30131	Pugliese	PAC-1	1990	45	single, dual, or quad	simple, reliable, user friendly machine! single sided shuttle

Timberline Machinery, Inc. - One of the largest stocking dealers of used plastic machinery in the USA, including injection molding machines, blow molding machines, and extrusion machinery.
7 Pittsburgh Ave Nashua, New Hampshire 03062, USA
Phone 603-889-7233 Fax 603-889-7300 Call Ed Makepeace